dmesg - Intel Celeron 867
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10-0.bpo.2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.10.5-1~bpo70+1 (2013-08-11)
Command line: BOOT_IMAGE=/vmlinuz-3.10-0.bpo.2-amd64 root=/dev/mapper/grieg-root ro quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000da515fff] usable
BIOS-e820: [mem 0x00000000da516000-0x00000000da558fff] ACPI NVS
BIOS-e820: [mem 0x00000000da559000-0x00000000da7cdfff] usable
BIOS-e820: [mem 0x00000000da7ce000-0x00000000da966fff] reserved
BIOS-e820: [mem 0x00000000da967000-0x00000000daac5fff] usable
BIOS-e820: [mem 0x00000000daac6000-0x00000000dad67fff] reserved
BIOS-e820: [mem 0x00000000dad68000-0x00000000dafe7fff] ACPI NVS
BIOS-e820: [mem 0x00000000dafe8000-0x00000000daffffff] ACPI data
BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: ZOTAC XXXXXX/XXXXXX, BIOS A237PA10 06/18/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FE0000000 write-back
2 base 0DB800000 mask FFF800000 uncachable
3 base 0DC000000 mask FFC000000 uncachable
4 base 0E0000000 mask FE0000000 uncachable
5 base 21FE00000 mask FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdaac6 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce70-0x000fce7f] mapped at [ffff8800000fce70]
Base memory trampoline at [ffff880000097000] 97000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0186f000, 0x0186ffff] PGTABLE
BRK [0x01870000, 0x01870fff] PGTABLE
BRK [0x01871000, 0x01871fff] PGTABLE
init_memory_mapping: [mem 0x21fc00000-0x21fdfffff]
[mem 0x21fc00000-0x21fdfffff] page 2M
BRK [0x01872000, 0x01872fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21fbfffff]
[mem 0x21c000000-0x21fbfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x3fffffff]
[mem 0x20200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x40200000-0xda515fff]
[mem 0x40200000-0xda3fffff] page 2M
[mem 0xda400000-0xda515fff] page 4k
BRK [0x01873000, 0x01873fff] PGTABLE
init_memory_mapping: [mem 0xda559000-0xda7cdfff]
[mem 0xda559000-0xda7cdfff] page 4k
init_memory_mapping: [mem 0xda967000-0xdaac5fff]
[mem 0xda967000-0xdaac5fff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x367d0000-0x373dffff]
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000daff4068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000daffcdd8 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000daff4150 08C86 (v02 ALASKA A M I 00000015 INTL 20051117)
ACPI: FACS 00000000dafdff80 00040
ACPI: APIC 00000000daffced0 00062 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000daffcf38 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000daffcf78 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: SSDT 00000000daffcfb0 006FC (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000daffd6b0 00996 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
Initmem setup node 0 [mem 0x00000000-0x21fdfffff]
NODE_DATA [mem 0x21fdf2000-0x21fdf5fff]
[ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217400000-ffff88021e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x3fffffff]
node 0: [mem 0x40200000-0xda515fff]
node 0: [mem 0xda559000-0xda7cdfff]
node 0: [mem 0xda967000-0xdaac5fff]
node 0: [mem 0x100000000-0x21fdfffff]
On node 0 totalpages: 2073222
DMA zone: 56 pages used for memmap
DMA zone: 156 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12170 pages used for memmap
DMA32 zone: 890090 pages, LIFO batch:31
Normal zone: 16121 pages used for memmap
Normal zone: 1179136 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040000000 - 0000000040200000
PM: Registered nosave memory: 00000000da516000 - 00000000da559000
PM: Registered nosave memory: 00000000da7ce000 - 00000000da967000
PM: Registered nosave memory: 00000000daac6000 - 00000000dad68000
PM: Registered nosave memory: 00000000dad68000 - 00000000dafe8000
PM: Registered nosave memory: 00000000dafe8000 - 00000000db000000
PM: Registered nosave memory: 00000000db000000 - 00000000db800000
PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021fa00000 s85184 r8192 d21312 u1048576
pcpu-alloc: s85184 r8192 d21312 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2044719
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.10-0.bpo.2-amd64 root=/dev/mapper/grieg-root ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8087936k/8910848k available (3691k kernel code, 617960k absent, 204952k reserved, 3078k data, 924k init)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
NR_IRQS:33024 nr_irqs:512 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1296.935 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.87 BogoMIPS (lpj=5187740)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Celeron(R) CPU 867 @ 1.30GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
smpboot: Booting Node 0, Processors #1 OK
Brought up 2 CPUs
smpboot: Total of 2 processors activated (5187.74 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xda516000-0xda558fff] (274432 bytes)
PM: Registering ACPI NVS region [mem 0xdad68000-0xdafe7fff] (2621440 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000dad41798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000dad42a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000dad40d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf7e0a000-0xf7e0a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf7e08000-0xf7e083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7e00000-0xf7e03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf7e07000-0xf7e073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 24: [mem 0xf7e06000-0xf7e067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7e05000-0xf7e050ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:02:00.0: reg 10: [mem 0xf7d00000-0xf7d07fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:03:00.0: [8086:0896] type 00 class 0x028000
pci 0000:03:00.0: reg 10: [mem 0xf7c00000-0xf7c01fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:04:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:04:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xda516000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda7ce000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdaac6000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] has been reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x0a00-0x0a1f] has been reserved
system 00:07: [io 0x0a30-0x0a3f] has been reserved
system 00:07: [io 0x0a20-0x0a2f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [dma 0 disabled]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.2: PCI bridge to [bus 02]
pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 12352k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd6516000-0xda516000] (64MB) mapped at [ffff8800d6516000-ffff8800da515fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1379252607.892:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15820
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
cpuidle: using governor ladder
cpuidle: using governor menu
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:05: setting system clock to 2013-09-15 13:43:28 UTC (1379252608)
Freeing unused kernel memory: 924k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 396k freed
Freeing unused kernel memory: 488k freed
udevd[57]: starting version 175
SCSI subsystem initialized
ACPI: bus type ATA registered
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: setting latency timer to 64
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: irq 44 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 00:01:2e:47:6a:be, XID 0c900800 IRQ 44
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ACPI: Fan [FAN0] (off)
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e08000
libata version 3.00 loaded.
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10-0.bpo.2-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
ehci-pci 0000:00:1d.0: setting latency timer to 64
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.10-0.bpo.2-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.10-0.bpo.2-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:02:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e07000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.10-0.bpo.2-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7e06000 port 0xf7e06100 irq 46
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
microcode: CPU0 updated to revision 0x28, date = 2012-04-24
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
microcode: CPU1 updated to revision 0x28, date = 2012-04-24
perf_event_intel: PEBS enabled due to microcode update
microcode: Microcode Update Driver: v2.00 , Peter Oruba
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: M4-CT064M4SSD2, 0309, max UDMA/100
ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA M4-CT064M4SSD2 0309 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
bio: create slab at 1
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
PM: Starting manual resume from disk
PM: Hibernation image partition 254:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT3-fs (dm-0): recovery required on readonly filesystem
EXT3-fs (dm-0): write access will be enabled during recovery
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-0): recovery complete
EXT3-fs (dm-0): mounted filesystem with ordered data mode
usb 4-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 6 ports detected
udevd[380]: starting version 175
usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 1297.053 MHz
Switching to clocksource tsc
usb 3-1: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 3-1: New USB device found, idVendor=174c, idProduct=5106
usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 3-1: Product: AS2105
usb 3-1: Manufacturer: ASMedia
usb 3-1: SerialNumber: WD-WMAVU0551545
ACPI: Requesting acpi_cpufreq
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
mei_me 0000:00:16.0: setting latency timer to 64
mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
usb 3-2: new SuperSpeed USB device number 3 using xhci_hcd
[drm] Memory usable by graphics device = 2048M
i915 0000:00:02.0: setting latency timer to 64
usb 3-2: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 3-2: New USB device found, idVendor=174c, idProduct=5106
usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 3-2: Product: AS2105
usb 3-2: Manufacturer: ASMedia
usb 3-2: SerialNumber: Z300MKYZ
i915 0000:00:02.0: irq 48 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
input: PC Speaker as /devices/platform/pcspkr/input/input2
cfg80211: Calling CRDA to update world regulatory domain
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
iwlwifi 0000:03:00.0: firmware: agent loaded iwlwifi-6000g2b-6.ucode into memory
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
usb 4-1.1: new high-speed USB device number 3 using ehci-pci
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 130 BGN, REV=0xB0
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
i915 0000:00:02.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
fbcon: inteldrmfb (fb0) is primary device
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi6 : usb-storage 3-1:1.0
usb-storage 3-2:1.0: USB Mass Storage device detected
usb 4-1.1: New USB device found, idVendor=050d, idProduct=0237
usb 4-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 4-1.1: Product: USB 2.0 Hub [MTT]
hub 4-1.1:1.0: USB hub found
hub 4-1.1:1.0: 7 ports detected
scsi7 : usb-storage 3-2:1.0
usbcore: registered new interface driver usb-storage
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
i915: fixme: max PWM is zero
acpi device:47: registered as cooling_device7
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
usb 4-1.2: new high-speed USB device number 4 using ehci-pci
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
usb 4-1.2: New USB device found, idVendor=0bda, idProduct=0129
usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1.2: Product: USB2.0-CRW
usb 4-1.2: Manufacturer: Generic
usb 4-1.2: SerialNumber: 20100201396000000
rts5139: module is from the staging directory, the quality is unknown, you have been warned.
scsi8 : SCSI emulation for RTS5139 USB card reader
scsi 8:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg1 type 0
usbcore: registered new interface driver rts5139
sd 8:0:0:0: [sdb] Attached SCSI removable disk
usb 4-1.6: new full-speed USB device number 5 using ehci-pci
usb 4-1.6: New USB device found, idVendor=8086, idProduct=0189
usb 4-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
usb 4-1.1.4: new full-speed USB device number 6 using ehci-pci
usb 4-1.1.4: New USB device found, idVendor=067b, idProduct=2303
usb 4-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.1.4: Product: USB-Serial Controller
usb 4-1.1.4: Manufacturer: Prolific Technology Inc.
EXT3-fs (dm-0): using internal journal
usb 4-1.1.6: new full-speed USB device number 7 using ehci-pci
loop: module loaded
usb 4-1.1.6: New USB device found, idVendor=04fa, idProduct=2490
usb 4-1.1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-1.1.7: new full-speed USB device number 8 using ehci-pci
usb 4-1.1.7: New USB device found, idVendor=03eb, idProduct=204b
usb 4-1.1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.1.7: Product: CUL868
usb 4-1.1.7: Manufacturer: busware.de
cdc_acm 4-1.1.7:1.0: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver pl2303
pl2303 4-1.1.4:1.0: pl2303 converter detected
usb 4-1.1.4: pl2303 converter now attached to ttyUSB0
scsi 6:0:0:0: Direct-Access WDC WD15 EADS-00P8B0 01.0 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
scsi 7:0:0:0: Direct-Access ST4000VN 000-1H4168 SC43 PQ: 0 ANSI: 5
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
sd 7:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
sd 7:0:0:0: [sdd] Write Protect is off
sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00
sd 7:0:0:0: [sdd] No Caching mode page present
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sd 7:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
sd 7:0:0:0: [sdd] No Caching mode page present
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sdc: unknown partition table
sd 6:0:0:0: [sdc] No Caching mode page present
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] Attached SCSI disk
Adding 2572284k swap on /dev/mapper/grieg-swap_1. Priority:-1 extents:1 across:2572284k SS
sdd: sdd1
sd 7:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
sd 7:0:0:0: [sdd] No Caching mode page present
sd 7:0:0:0: [sdd] Assuming drive cache: write through
sd 7:0:0:0: [sdd] Attached SCSI disk
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
usb 4-1.1.2: new low-speed USB device number 9 using ehci-pci
usb 4-1.1.2: New USB device found, idVendor=04f2, idProduct=0402
usb 4-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.1.2: Product: USB Keyboard
usb 4-1.1.2: Manufacturer: Chicony
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.2/4-1.1.2:1.0/input/input9
hid-generic 0003:04F2:0402.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.0-1.1.2/input0
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1.2/4-1.1.2:1.1/input/input10
hid-generic 0003:04F2:0402.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:1d.0-1.1.2/input1
Bridge firewalling registered
device eth0 entered promiscuous mode
r8169 0000:04:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
r8169 0000:04:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
br0: topology change detected, propagating
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
Key type dns_resolver registered
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.22)
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x2-0x2-0x1
input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Ebtables v2.0 registered
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
owftpd[19411]: segfault at 0 ip 00007f0df1d15088 sp 00007fffd26b5098 error 4 in libc-2.13.so[7f0df1c03000+180000]
hid-generic 0003:04F2:0402.0002: can't reset device, 0000:00:1d.0-1.1.2/input1, status -71
hid-generic 0003:04F2:0402.0001: can't reset device, 0000:00:1d.0-1.1.2/input0, status -71
usb 4-1.1.2: USB disconnect, device number 9
EXT4-fs (dm-2): recovery complete
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/W MODULE].
QNX4 filesystem 0.2.3 registered.
xor: measuring software checksum speed
prefetch64-sse: 7296.000 MB/sec
generic_sse: 6699.000 MB/sec
xor: using function: prefetch64-sse (7296.000 MB/sec)
raid6: sse2x1 3571 MB/s
raid6: sse2x2 4333 MB/s
raid6: sse2x4 5046 MB/s
raid6: using algorithm sse2x4 (5046 MB/s)
raid6: using ssse3x2 recovery algorithm
bio: create slab at 2
Btrfs loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device vnet0 entered promiscuous mode
br0: topology change detected, propagating
br0: port 2(vnet0) entered forwarding state
br0: port 2(vnet0) entered forwarding state
usb 3-1: USB disconnect, device number 2
usb 3-1: new SuperSpeed USB device number 4 using xhci_hcd
usb 3-1: Parent hub missing LPM exit latency info. Power management will be impacted.
usb 3-1: New USB device found, idVendor=174c, idProduct=5106
usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 3-1: Product: AS2105
usb 3-1: Manufacturer: ASMedia
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi9 : usb-storage 3-1:1.0
scsi 9:0:0:0: Direct-Access WDC WD15 EADS-00P8B0 01.0 PQ: 0 ANSI: 5
sd 9:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 9:0:0:0: [sdc] No Caching mode page present
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdc] No Caching mode page present
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sdc: unknown partition table
sd 9:0:0:0: [sdc] No Caching mode page present
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sd 9:0:0:0: [sdc] Attached SCSI disk
EXT3-fs (sdc): error: can't find ext3 filesystem on dev sdc.
EXT2-fs (sdc): error: can't find an ext2 filesystem on dev sdc.
EXT4-fs (sdc): VFS: Can't find ext4 filesystem
REISERFS warning (device sdc): sh-2021 reiserfs_fill_super: can not find reiserfs on sdc
XFS (sdc): bad magic number
ffff8801085b0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
ffff8801085b0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
ffff8801085b0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
ffff8801085b0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
XFS (sdc): Internal error xfs_sb_read_verify at line 730 of file /build/linux-oNUx4b/linux-3.10.5/fs/xfs/xfs_mount.c. Caller 0xffffffffa0763d81
CPU: 0 PID: 193 Comm: kworker/0:1H Tainted: G C 3.10-0.bpo.2-amd64 #1 Debian 3.10.5-1~bpo70+1
Hardware name: ZOTAC XXXXXX/XXXXXX, BIOS A237PA10 06/18/2012
Workqueue: xfslogd xfs_buf_iodone_work [xfs]
ffffffff8138eacd 0000000000000091 ffffffffa0765c4d ffffffffa0763d81
00000000000002da 0000000000000000 0000000000000016 ffff880200529e00
ffff8801f8329000 ffffe8ffffc00b00 ffffffffa07a720e ffffffffa0763d81
Call Trace:
[] ? dump_stack+0xd/0x17
[] ? xfs_corruption_error+0x54/0x6f [xfs]
[] ? xfs_buf_iodone_work+0x3c/0x6a [xfs]
[] ? xfs_sb_read_verify+0xa4/0xbf [xfs]
[] ? xfs_buf_iodone_work+0x3c/0x6a [xfs]
[] ? xfs_buf_iodone_work+0x3c/0x6a [xfs]
[] ? process_one_work+0x191/0x28f
[] ? arch_local_irq_enable+0x4/0x8
[] ? worker_thread+0x121/0x1e7
[] ? rescuer_thread+0x269/0x269
[] ? kthread+0x81/0x89
[] ? __kthread_parkme+0x5d/0x5d
[] ? ret_from_fork+0x7c/0xb0
[] ? __kthread_parkme+0x5d/0x5d
XFS (sdc): Corruption detected. Unmount and run xfs_repair
XFS (sdc): SB validate failed with error 22.
FAT-fs (sdc): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sdc): bogus number of reserved sectors
FAT-fs (sdc): Can't find a valid FAT filesystem
FAT-fs (sdc): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT-fs (sdc): bogus number of reserved sectors
FAT-fs (sdc): Can't find a valid FAT filesystem
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU0 updated to revision 0x29, date = 2013-06-12
platform microcode: firmware: agent loaded intel-ucode/06-2a-07 into memory
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
microcode: CPU1 updated to revision 0x29, date = 2013-06-12
br0: port 2(vnet0) entered disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entered disabled state
usb 3-1: USB disconnect, device number 4
dconf worker[22977]: segfault at 0 ip 00007f20bf07c56a sp 00007f20bcd27bd0 error 4 in libgio-2.0.so.0.3200.4[7f20befd4000+14c000]